定量的复合金属锂作为三维泡沫锂电极用于锂电池的研究

金属锂作为电池的负极材料具有极高的比容量和极低的氧化还原电位,能够显著提升电池的能量密度。然而,金属锂负极在实际应用中所面临的主要问题是锂枝晶、界面副反应和电极体积变化大的难题。在本文中,我们提出了一种通过将定量的金属锂与三维骨架进行复合形成三维泡沫锂负极的策略,并利用三维泡沫锂来抑制锂枝晶的生长和缓解电极的体积变化。因此,三维泡沫锂电极有利于金属锂负极的高效利用,并能借助其与平面锂箔相比更高的比表面积和更多的反应位点来提升电池的倍率性能。因此,通过采用三维泡沫锂,对称电池的循环寿命和倍率性能都得到了有效的提升。EIS数据结果表明,三维泡沫锂能够减小对称电池的电荷转移阻抗。而且,将三维泡沫锂作为负极组装的LTO全电池,与锂箔作为负极相比,循环1000周平均放电比容量从65 mAh·g^-1提升至121 mAh·g^-1。     

亚硫酸盐无氰电沉积金新工艺及机制

直接以氯金酸作为主盐、 羟基乙叉二膦酸（HEDP）作为镀液稳定剂和镀层细化剂、 结合添加剂, 组成亚硫酸盐无氰镀金新工艺; 研究镀液稳定性、 镀层形态及金电沉积机制。结果表明, HEDP可明显提升镀液稳定性;不含HEDP的亚硫酸盐镀金液中, 镀层呈棒状晶粒并随沉积时间延长而逐渐生长,导致镀层外观随镀层厚度增加由金黄色转变为红棕色。镀液含有HEDP时, 金晶粒形态由棒状转变为棱锥状, 且棱锥状晶粒随沉积时间延长生长速率较小, 镀层厚度为1 μm时仍呈现金外观。电化学实验表明金电沉积不经历成核过程。     

Solvent terminated natural deep eutectic solvent microextraction for concentration of curcuminoids in Curcumae Longae Rhizoma and turmeric tea

A novel solvent terminated microextraction method based on a natural deep eutectic solvent (L-menthol and lactic acid at a molar ratio of 1:2) coupled with high-performance liquid chromatography was proposed, which was utilized for the separation and enrichment of bisdemethoxycurcumin, demethoxycurcumin and curcumin in Curcumae Longae Rhizoma and turmeric tea. The effects of independent parameters on extraction efficiency were optimized by single-factor analysis. Subsequently, four predominated parameters affecting the extraction procedure, including extractant volume, salt concentration, demulsifier consumption, and demulsification time, were further evaluated by a central composite design. Under the optimized conditions, the linear ranges of calibration curves were 0.005–0.5 μg/mL for bisdemethoxycurcumin, 0.004–0.4 μg/mL for demethoxycurcumin, and 0.0045–0.45 μg/mL for curcumin, respectively. In addition, the developed method provided low detection limits (0.1–0.4 ng/mL) and high enrichment factors (279–350). Its intra-day and inter-day precision were carried out by relative standard deviation ranging from 2.2 to 9.2%. Finally, the applicability of this method was assessed by the analysis of Curcumae Longae Rhizoma and turmeric tea samples. The results showed that these samples were detected successfully and the spiked recoveries over the range of 85.3-108.9% with relative standard deviations of 1.6-8.9% were attained, indicating its high relative recoveries with good precision in real sample analysis.     

Chiral separation using cyclodextrins as mobile phase additives in open-tubular liquid chromatography with a pseudophase coating

The chiral separation of various analytes (dichlorprop, mecoprop, ibuprofen, and ketoprofen) was demonstrated with different cyclodextrins as mobile phase additives in open-tubular liquid chromatography using a stationary pseudophase semipermanent coating. The stable coating was prepared by a successive multiple ionic layer approach using poly(diallyldimethylammonium chloride), polystyrene sulfonate, and didodecyldimethyl ammonium bromide. Increasing concentrations (0–0.2 mM) of various native and derivatized cyclodextrins in 25 mM sodium tetraborate (pH 9.2) were investigated. Chiral separation was achieved for the four test analytes using 0.05–0.1 mM β-cyclodextrin (resolution between 1.11 and 1.34), γ-cyclodextrin (resolution between 0.78 and 1.27), carboxymethyl-β-cyclodextrin (resolution between 1.64 and 2.59), and 2-hydroxypropyl-β-cyclodextrin (resolution between 0.71 and 1.76) with the highest resolutions obtained with 0.1 mM carboxymethyl-β-cyclodextrin. %RSD values were <10%. This is the first demonstration of chiral open-tubular liquid chromatography using achiral chromatographic coatings and cyclodextrins as mobile phase additives.     

云南东川区域重金属环境暴露健康风险评价

以云南省昆明市东川主要河流及附近土壤、植物为研究对象,对其进行采样分析,并根据美国环境保护署(U.S.EPA)推荐健康风险评价方法对东川流域多种环境因素进行了重金属的健康风险评价。结果表明,水环境中致癌物质造成的风险最大,风险值在2.35×10^(-4)~8.27×10^(-4),达到U.S.EPA推荐的最大值10^(-4),植物根部的健康风险值为0.40×10^(-1)~7.00×10^(-1),茎叶部分的风险值为2.42×10^(-2)~15.24×10^(-2),根部存在的重金属对人体的健康风险约为茎叶部分的5倍;土壤中非致癌物质的健康风险影响较大,总健康风险值区间为0.64×10^(-1)~3.83×10^(-1)。评价结果可为该区域地表水、土壤和植物资源的污染治理、保护开发提供依据。     

Local Structure Analysis and Modelling of Lignin-Based Carbon Composites through the Hierarchical Decomposition of the Radial Distribution Function

Carbonized lignin has been proposed as a sustainable and domestic source of activated, amorphous, graphitic, and nanostructured carbon for many industrial applications as the structure can be tuned through processing conditions. However, the inherent variability of lignin and its complex physicochemical structure resulting from feedstock and pulping selection make the Process-Structure-Property-Performance (PSPP) relationships hard to define. In this work, radial distribution functions (RDFs) from synchrotron X-ray and neutron scattering of lignin-based carbon composites (LBCCs) are investigated using the Hierarchical Decomposition of the Radial Distribution Function (HDRDF) modelling method to characterize the local atomic environment and develop quantitative PSPP relationships. PSPP relationships for LBCCs defined by this work include crystallite size dependence on lignin feedstock as well as increasing crystalline volume fraction, nanoscale composite density, and crystallite size with increasing reduction temperature.     

Booting the electrochemical properties of Fe-based anode by the formation multiphasic nanocomposite for lithium-ion batteries

Fe-based compounds with good environmental friendliness and high reversible capacity have attracted considerable attention as anode for lithium-ion batteries.But,similar to other transition metal oxides(TMOs),it is also affected by large volume changes and inferior kinetics during redox reactions,resulting in the destruction of the crystal structure and poor electrochemical performance.Here,Fe_3O_4/C nanospheres anchored on the two-dimensional graphene oxide as precursors are phosphated and sintered to build the multiphasic nanocomposite.XRD results confirmed the multiphasic nanocomposite composed of Fe_2O_3,Fe_3O_4 and Fe_3PO_7,which will facilitate the Li~+ diffusion.And the carbonaceous matrix will buffer the volume changes and enhance electron conduction.Consequently,the multiphasic Febased anode delivers a large specific capacity of 1086 mAh/g with a high initial Coulombic efficiency of 87% at 0.1 C.It also has excellent cycling stability and rate property,maintaining a capacity retention of～87% after 300 cycles and a high reversible capacity of 632 mAh/g at 10 C.The proposed multiphasic structure offers a new insight into improving the electrochemical properties of TMO-based anodes for advanced alkali-ion batteries.     

同构MOFs复合氧化石墨烯电极材料构筑高性能超级电容器

在水热条件下一步自组装合成系列同构X-MOF （X₆O （TATB）₄（H⁺）₂·（H₂O）₈·（DMF）₂,X=Zn、Co、Ni; H₃TATB=4,4'',4″-s-triazine-2,4,6-triyl-tribenzoic acid; DMF=N,N-二甲基甲酰胺）和氧化石墨烯（GO）的复合材料（X-MOF@GO）,并探究其作为超级电容器电极材料的电化学性能。通过X射线粉末衍射、X射线光电子能谱和扫描电子显微镜测试证明GO和MOFs复合成功。其中,性能最优的Ni-MOFs@1.5GO （GO的添加量为1.5 mL）的比电容高达694.8 F·g^-1（0.5 A·g^-1）,约是Ni-MOF的2倍。电化学测试结果表明：复合材料X-MOF@1.0GO较其原MOF表现出更大的比电容和更好的倍率性能。在3.5 A·g^-1的电流密度下,1 000次循环充放电后,Ni-MOFs@1.0GO仍保持初始比电容量的81.2%。与活性炭（AC）组装的非对称超级电容器Ni-MOF@1.5GO//AC的性能最优,其功率密度为754.3 W·kg^-1时,能量密度为15.4 Wh·kg^-1,且循环3 000次后比电容保持率约为70.0%,显示出较长的循环寿命。     

“功能涂料”课程的教学改革:打造趣味性、互动性和挑战性的课堂*

本着培养涂料行业精英人才的宗旨,针对涂料行业对人才需求的特点,结合多年教学经验,从教材的选择、教学内容设置、教学方法改进以及考核方法改革等4个方面探索了“功能涂料”课程的教学方法改革与课程实践。通过自编教材,精心设置授课内容,将科研成果、前沿知识、生活场景、新闻事件与书本知识相结合,提高课堂的趣味性;通过讨论法和交换式互动上课来加强课堂的互动性;通过过程性评价提高课程的学业挑战度。通过教学改革,本课程的选课率和出勤率得到了大幅提高,学生对涂料的兴趣明显增加,毕业后选择进入涂料领域工作的学生也越来越多。     

基于红外隐身及多波段兼容隐身材料

随着探测系统的快速发展和探测精度的提高,隐身技术的需求日益迫切。由于传统的红外隐身材料面临着多途径目标探测的严峻挑战,因此开发既能满足红外隐身要求又能满足雷达隐身、可见光隐身、激光隐身要求的新型兼容隐身材料具有重要意义。红外隐身材料主要针对目标的红外辐射特征进行材料、结构设计,降低目标在背景中热红外辐射信号的突出性以及被热红外制导武器命中的概率。本综述概述了红外隐身及兼容材料的工作原理、制备方法及最新研究进展。首先介绍了最具有发展前景的红外隐身材料包括光子晶体、掺杂半导体、相变材料和纳米材料的结构特性、隐身机理和研究成果,重点关注了实现红外隐身的材料以及具体的隐身特性,讨论了红外兼容雷达、红外兼容可见光、红外兼容激光以及多波段兼容等材料的兼容隐身条件,并对其最新研究进展进行了系统的总结。最后,梳理了目前红外隐身材料以及各兼容材料所存在的不足及面临的困难,并对未来的研究方向进行了展望。